Table of Contents
Advertisement
Chapter 8. Web Access and Management
The following information is displayed in the Call Status box for both incoming
and outgoing communication:
Performing System Upgrade
You can upgrade the xPoint
available.
xPoint Standard (S) Ver. 1.5 User Guide
Figure 38. Call Status Box (Web)
Video Codec – Video codec used to display video in this call
Video Resolution – Video resolution used in this call
Video Bandwidth – Bandwidth used by the video in this call
Video Frame Rate – Video frame rate used in this call
Audio Codec – Audio codec used to sound audio in this call
Audio Bandwidth – Bandwidth used by the audio in this call
Encryption Mode – Type of encryption used in this call (if encryption is
used).
To return to the Call View box, click Back.
To upgrade the xPoint
1.
After logging in, click System>System Upgrade; the System Upgrade
box appears.
software a newer version when such becomes
S
software:
S
Performing System Upgrade
• 77
Advertisement
Table of Contents
Need help?
Do you have a question about the xPointS and is the answer not in the manual?