Emblaze-VCON xPointS User Manual page 58

Chapter 7. Advanced Settings
xPoint Standard (S) Ver. 1.5 User Guide
Figure 23. H.323 Settings
2. In the H.323 Settings window, set the following options and
parameters:
o None – Keep this option selected (selected by default) if you do not
want to use an MXM server or a gatekeeper.
o MXM – Select this option if you want xPoint
communicate/interact with an MXM server and utilize its advanced
features. If selected, enter the required details in the following fields:
Server Address – Enter the IP address of the MXM server.
User Name – Enter the user name used to log into the MXM
server.
User Number – Enter your user number used for identification
on the MXM server. If not entered, the MXM server will
automatically generate a number.
Password – Enter the password used to log into the MXM
server.
o Gatekeeper – Select this option if you want xPoint
communicate/interact with a gatekeeper server. If selected, enter the
required details in the following fields:
Server Address – Enter the IP address of the gatekeeper
server.
User Name – Enter the user name used to log into the
gatekeeper server.
H.323 Protocol Settings
to
S
to
S
• 57