Emblaze-VCON xPointS User Manual page 65

Chapter 7. Advanced Settings
xPoint Standard (S) Ver. 1.5 User Guide
Figure 28. System Settings Window
2. In the System Settings window, set the following options and
parameters
o Obtain Address from DHCP Server – Select the checkbox to
obtain an IP address from a DHCP server.
o IP Address – Set the IP address for this system. If using a DHCP
server, the address obtained from the DHCP server is displayed.
o Subnet Mask – Set the subnet mask number for your network. If
using a DHCP server, the address obtained from the DHCP server is
displayed.
o Default Gateway – Set the IP address of the default gateway
router. If using a DHCP server, the address obtained from the DHCP
server is displayed.
o Obtain DNS Automatically – Use the DHCP server to decide your
DNS server address. If you do not select Obtain address from DHCP
server, fill in the following fields:
o DNS Server – Set the IP address of the DNS server. If using a
DHCP server, the address obtained from the DHCP server is
displayed.
o Additional DNS Server – Alternative DNS server, to be used in
case the first DNS server defined can't supply the needed services.
o DNS Suffix – Set the DNS domain suffix to be used by this system.
System Settings
• 64