Table of Contents
Advertisement
Chapter 7. Advanced Settings
Secure Connect Settings
If required, you can configure a secure IP-based workgroup through which
xPoint
xPoint Standard (S) Ver. 1.5 User Guide
will communicate.
S
To set a secure workgroup connection:
1.
Select Settings>Network>IP>Sec Connect; the Secure Connect
window appears.
Figure 32. Secure Connect Settings Window
2.
Select the Enable Secure Connect checkbox; the following fields
become available:
o Address – Enter the IP address of the secure workgroup's server
o Group Name – Enter the workgroup's name
o User Name – Enter the user name for logging into the workgroup
server
o Password – Enter the password for logging into the workgroup
server.
3.
Select Apply.
Secure Connect Settings
• 69
Advertisement
Table of Contents
Need help?
Do you have a question about the xPointS and is the answer not in the manual?