Configuring The Audio - Emblaze-VCON xPointS User Manual

Chapter 3. Configuration Basics

Configuring the Audio

The audio input/output must be configured so that you will be able to hear and
be heard properly in videoconferences.
xPoint Standard (S) Ver. 1.5 User Guide
To configure the camera settings:
1. In the Camera Settings window, select the correct options from the
Camera, Input Device, and Capability drop-down lists.
Note: xPoint camera can be either a USB video camera, or a PTZ camera
S
that should be connected using an appropriate adapter cable for analog-
to-digital conversion.
2. Optional: set the percentage (%) of Color, Contrast, Brightness, and
Hue. You can leave the default settings of these parameters unchanged.
3. Specify the Communication Port you are using (default is Com 1).
4. Select the correct option from the Camera Model and Analog Video
Format drop-down lists.
5. Optional for PTZ cameras: select the Allow Far End Camera
Control (FECC) check box to enable remote side to control your PTZ
camera.
6. Select Apply to apply the changes without leaving this window, or
select OK (in the GUI) to save the changes and close the Camera
Settings window.
To access the audio settings:
1. Press OK on the remote control; the main menu appears.
2. Using the remote control's joystick, select Settings> Audio, and then
press OK; the Audio Settings window appears.
Configuring the Audio
• 21