Adding Participants To The Interactive Multicast - Emblaze-VCON xPointS User Manual

Chapter 6. Interactive Multicast Videoconferencing

Adding Participants to the Interactive Multicast

You can wait for participants to join the interactive multicast, or you can actively
add participants to the session.
xPoint Standard (S) Ver. 1.5 User Guide
To start an interactive multicast:
After defining the session in the Start Multicast window, select Start
Interactive; the Interactive Multicast Call Manager window appears,
and the message: "<Your Name> Starting Multicast" is displayed.
Figure 16. Interactive Multicast Call Manager
Note: once you start the multicast session, you are defined as the Chair
(see Interactive Multicast
To add a participant to the interactive multicast:
1. In the Interactive Multicast Call Manager window, select Add
Participant; the New Call bar appears.
2. In the New Call bar, type the participant address/name or search in the
participant in the address book.
3. Press Call (green button) on the remote control; the message: "Calling"
is displayed.
When the participant accepts the call, the following message is displayed:
"Participant <IP> added to Interactive multicast". The participant is
then added to the Participants list.
Adding Participants to the Interactive Multicast
Overview).
• 45