Displaying System Information - Emblaze-VCON xPointS User Manual

Chapter 2. Getting Started
The following menu buttons may appear occasionally in the GUI (appear in the
context of use):
GUI Button

Displaying System Information

Whenever the xPoint
Different details are displayed when the unit is in idle state, in recording mode, or
in an ongoing videoconference session.
xPoint Standard (S) Ver. 1.5 User Guide
Table 3. Common GUI Buttons
Label
OK
Back
Apply
Restore Defaults
Shutdown
Restart
Open
Next
Finish
unit is turned on, you can view the system status details.
S
To display the current system status details:
Press Status (
appears.
Function
Save changes
Return to the previous window
without saving changes
Apply changes or soft-start your
system
Cancels all user-defined settings and
returns the unit to its factory default
settings
Shut down the unit
Reboot the unit
Open the selected folder/file
Continue to the next step
Finish and close a configuration
wizard/dialog
) on the remote control; the Status window
Displaying System Information
• 16