Mcu Settings - Emblaze-VCON xPointS User Manual

Chapter 7. Advanced Settings

MCU Settings

The embedded MCU (optional feature) enables connecting up to 4 endpoints
simultaneously from various locations. This MCU capability includes the host
system and an additional 3 endpoints, one of which can be connected through
ISDN.
xPoint Standard (S) Ver. 1.5 User Guide
Figure 30. Recording and Streaming Window
2. In the Recording and Streaming Settings window the following
properties can be configured:
o Change Recording Path – select this button to set the path of the
recording directory. This option is useful when changing the
recording location to a USB flash drive or any external storage
location.
o Number of Streaming Ports [1..20] – Enter the number of
streaming ports. The default number of streaming ports is 10.
o Streaming Port [1..65535] – Enter the streaming port number.
The default port is 12100.
3. Select Apply.
Note: before using this functionality, please verify the licensing
capabilities of your system. Go to the license page:
Menu>Settings>General>License, and verify that the option "MCU"
is selected (√).
To configure the MCU settings:
1. Select Settings>MCU; the MCU Settings window appears.
MCU Settings
• 67