Emblaze-VCON xPointS User Manual page 18

Chapter 2. Getting Started
When xPoint
information:
xPoint Standard (S) Ver. 1.5 User Guide
Figure 5. Status Window
is in idle state, the Status window displays the following
S
IP Address – IP address of the xPoint
the DHCP server or as manually configured via Settings>System (static IP).
You can use this IP address to access and manage the unit via a browser (see
Accessing the xPointS Unit via a
Secure Connect IP – Indicates whether xPoint
connection, if such is defined (see
Mode – The current operation mode:
o Stand-Alone – The unit is not connected to an MXM server or a
gatekeeper
o MXM – The unit is connected to an MXM server
o Gatekeeper – The unit is connected to a gatekeeper server.
User Number – The user number used to identify the unit if an MXM
server or a gatekeeper is used
Displaying System Information
unit, as automatically assigned by
S
Browser)
uses a secure IP
S
Secure Connect Settings)
• 17