Table of Contents
Advertisement
Chapter 5. Quick Dialing Methods
Displaying the Call Log from the Address Book
You can select Call Log via the address book.
Adding a Call Log Entry to the Address book
You can add Call Log to the Address book for reuse later.
Clearing the Call Log
You can delete and thus manage Call Logs when you do not require them any
longer.
Using Speed Dial
Add up to 10 frequently used numbers/addresses to the Speed Dial. You can add,
Edit or Delete Speed Dial entries.
xPoint Standard (S) Ver. 1.5 User Guide
To select the Call Log via the remote control:
1.
On the remote control, press Call Log (
menu, select Recent Calls; the Call Log window appears.
2.
Select the number to dial; the contact number is copied to the New Call
field.
3.
Select Call (
screen is displayed.
When the call is answered on the far end, the system switches to Call mode.
To display the call log via the address book:
In the address book, select Call Log by pressing left with the joystick and
scrolling down.
To add call log entry to the address book:
1.
In the Call Log, select the entry you want to add to the address book and
then press OK on the remote control.
2.
Select Add; the Name/Address bar appears.
3.
Edit in the contact Name or Address if needed, and then select Save;
the log entry is added to the address book.
To delete a call log or clear the entire log:
1.
In the Call Log window, select which log entry to delete.
2.
Select Delete to delete just the selected entry, or Clear All to delete all
entries, and then press OK; the following message is displayed when
clearing all: "Are you sure?"
3.
Select Yes to delete, or No to cancel.
) or press Make Call (
Using Speed Dial
) – or – on the main
); the Calling
• 39
Advertisement
Table of Contents
Need help?
Do you have a question about the xPointS and is the answer not in the manual?