Pager Notification - ESI IVX 128 User Manual

Analog stations
Phone delivery
Whenever it receives a new/urgent message into your mailbox, the system will call the number that
you have programmed and play the prompt "You have messages; please enter your password." The
prompt will repeat three times before assuming that no one has answered and disconnecting.
Upon answering, enter your password (if no password is set, you must enter 0). You will then be
connected to your mailbox and can proceed with normal message retrieval operation.
Note: A "*" response instead of the password will cause the system to suspend calling until
another urgent/new message is received.

Pager notification

Pager notification can be programmed to operate as the sole notification method or in conjunction
with phone delivery.
You can have the system call and activate your external pager whenever the first new/urgent
message is left in your mailbox and repeat the page (at the interval programmed by the
Administrator) until all new messages have been retrieved.
Note: Inputting or deleting the phone number that is to be called for off-premise delivery or to
activate your pager will turn the feature on or off, respectively.
1 Delivery options
1 Phone
2 Pager
3 Phone then Page
4 Phone and Page
5 Turn feature off
2 Phone delivery
1 Phone delivery and delay
Enter the phone number followed by # (24 digits maximum
(or 8 or 7). Enter the delay time in 30-minute increments.
2 Delete phone number
When prompted, press 2 again to confirm deletion. The system will not attempt delivery until a new
number is entered.
3 Hear current phone number
7
If pauses or other special dialing characters are required, contact the Administrator.
B.8
7
). Do not include the line access code 9
IVX 128