Esi-Dex - ESI IVX 128 User Manual

Digital Feature Phone operation

Esi-Dex

Esi-Dex ("easy Dex") is a powerful feature that allows you to access and auto-dial stored names and
numbers. You may access names and numbers from three different sources:
Dex
Personal Dex
Station Dex
System Dex
Auto-dialing using Esi-Dex
While your station is idle (or just after receiving dial tone), repeatedly press ESI-DEX to select the
desired Dex:
3/15 10:12 AM
PERSONAL DEX
Note: The System Dex is not available if the Administrator has programmed no system-wide speed-
dial numbers.
Choose the desired name from the selected Dex, using one of the two following methods:
Press repeatedly ...
or (scroll keys)
A dialpad key
When the desired name and number appears, press ESI-DEX again to dial the number.
ELDRIDGE CORP
5559409434
Adding names to your Personal Dex
Caller ID method
Whenever a Caller ID name appears on your LCD display (while talking on an incoming call or during
message retrieval) press ESI-DEX to automatically store the name and number in your Personal
Dex. The display confirms:
XYZ COMPANY 3:21
CID STORED
A.12
Source
Names that you have stored for your use (see "Adding names to
your Personal Dex," page A.12)
All station, department, and guest mailbox names programmed
by the Installer
All system speed-dial names set up by the Administrator
3/15 10:12 AM
STATION DEX
To ...
Scroll through all names in the list from the beginning
or end
Scroll through only the names that correspond to the
three letters on the key.
IVX 128
3/15 10:12 AM
SYSTEM DEX