Deleting Names From Your Personal Dex - ESI IVX 128 User Manual

Digital feature phone
Hide thumbs Also See for IVX 128:
Table of Contents

Advertisement

IVX 128
Manual method
While your station is idle, press ESI-DEX to select ADD-A-NAME then press #. Input the name and
then the number as prompted (if needed, use the PROG/HELP Key for assistance):
ADD-A-NAME NAME:
1. To enter each character for the name, press the dial pad key that includes the desired character. The
key's possible character entries will change each time you press the key.
2. When the desired character is displayed, press # to confirm the character. The cursor will move to the
next character position. Use the
Example: To enter a B, press 2 twice (the possible options to scroll through are A, B, C, 2).
When B appears, press # to confirm and move to the next entry.
3. Repeat steps 1–2 until the name is complete. The name may contain up to 15 characters (a space is a
character, too).
4. Press # again when finished entering the name.
5. Now, enter the number — including, if necessary, the line access code 9 (or 8 or 7).
Note: To insert a two-second pause, press CONF.
6. Press # to confirm the entry.

Deleting names from your Personal Dex

Select the name to delete (using the procedure described in "Auto-dialing using Esi-Dex," page
A.12) and press * (or HOLD) to delete.
Using Esi-Dex: An example
Let's say you're on a call with the XYZ Company — XYZ COMPANY appears on your display — and
you wish to save the name and number for future use. Just press ESI-DEX. Your display will confirm
that the information has been stored. Now, to call the SK Company in the future:
Press ESI-DEX until you see PERSONAL DEX on the display.
1.
3/15 10:12 AM
PERSONAL DEX
7. Press the 9 key (corresponding to WXY). The display will show the first stored name that starts with W,
X or Y.
WALTON AND SONS
9095551020
8. Continue to press 9 until XYZ COMPANY appears in the display.
XYZ COMPANY
3185559421
9. Press ESI-DEX again. This dials the number for the XYZ Company.
Important: The number dialed (if stored from a Caller ID) will be the number for the actual line
used by the caller, and may be different than the caller's listed number. Additionally,
/
keys to back up or to insert a space.
Digital Feature Phone operation
A.13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents