Password; External Message Notification - ESI IVX 128 User Manual

IVX 128

5 Password

The password will apply to station programming, voice mail retrieval and certain other features
(when activated).
1 Enter new password
Your password may consist of 2–8 digits followed by # (0 cannot be the first digit). Entering 0 as the
sole password will turn off the password requirement.
2 Delete current password
3 Hear current password
4 Password security level
Select one of the following password levels.
Selection
0
1
2

6 External message notification

IVX can be programmed to deliver messages to an off-premises phone and/or to page you when a
message has been taken. You can set the phone number (cell phone, home number, another
extension, etc.), the pager number and a delay time--the period that the system is to wait before
attempting to deliver the message/page. You can further set the system to deliver only messages
marked as urgent (see "Urgent messages," next page).
The Administrator can also set for your station the:
• Number to be called or paged
• Delay period
• Number of attempts
• Interval between attempts (in increments of 30 minutes)
• "Quiet period" which suspends message delivery for late night, etc.
If you have programmed both an off-premise delivery number and a pager number, the system will
prompt you to choose one of the following delivery options:
• Phone-only
• Pager-only
• Phone, then pager-- attempts phone delivery until maximum number of attempts has been tried,
then follows paging programming.
• Phone and page at the same time
• No off-premises delivery
Result
No password required for access from any phone.
Password required only for remote access from the outside or
other stations.
Password always required.
Analog stations
B.7