User Programming: An Introduction - ESI IVX 128 User Manual

Digital Feature Phone operation

User programming: an introduction

All user-controlled features can be programmed from your station by following the voice-prompted
menus to:
• Set or change the programmable feature keys (see "Programmable feature keys," page A.26)
• Enable/disable station options (see "Station options," page A.28)
• Set station ring tone or ring volume
• Set or record voice mail options
• Set message delivery options
• Recover messages deleted in error
Enter programming mode by pressing the PROG/HELP Key (your station will be placed in DND mode
until you exit).
Voice prompts will play menu and sub-menu options to access the desired feature. You don't have
to wait for the entire prompt to be played. Therefore, once you've become familiar with the prompts
(consult "User programming menu overview" on the next page), you can quickly set any frequently
used feature.
Example: Press PROG/HELP 3 3 1 and then hang up to: enter programming; turn on headset
mode; and exit programming (3 3 0 rather than 3 3 1 would turn off headset mode).
Programming help
During any of the programming steps, press PROG/HELP again to hear a more detailed description
of the feature and related programming options.
Exiting programming mode
To exit programming mode, simply hang up.
A.24
IVX 128