Programming Your Guest Mailbox From A Digital Feature Phone; Select Personal Greeting; Password - ESI IVX 128 User Manual

IVX 128
Programming your guest mailbox from a Digital
Feature Phone
Press PROG/HELP, *, and the mailbox number. You will be prompted to: record the greeting, change
the password, enter an external paging number, or exit by hanging up.

1 Select personal greeting

Select the desired Greeting Number 1, 2, or 3. The current greeting will be played followed by
prompts to re-record, delete, hear again, or select as the current greeting by pressing #.
1 Record personal greeting
Begin recording at the tone, press 1 to stop. The new personal greeting automatically replaces the
previous greeting.
Important: Your mailbox will work only if at least one personal greeting exists for it.
2 Delete personal greeting
When prompted, press 2 again to confirm deletion. (See "Important" note, above.)
3 Hear current personal greeting

5 Password

Your password may consist of 2–8 digits followed by # (0 cannot be the first digit). The password
will apply to station programming, voice mail retrieval and certain other features when activated. If
you prefer not to have to enter a password, enter 0 as your password or select one of the following
password levels:
Selection
0
1
2
1 Enter new password
2 Delete current password
3 Hear current password
Result
No password required for access from any phone
Password required only for remote access, either off-premises
or from other stations within the system
Password always required
Special feature: Guest mailboxes
D.5