Download  Print this page

Using The Menu To Manage A Candidate Switch - HP ProCurve Series 2810 Management And Configuration Manual

Procurve series 2810 switches.
Hide thumbs

Advertisement

ProCurve Stack Management
Configuring Stack Management
Table 7-4. Candidate Configuration Options in the Menu Interface
Parameter
Default Setting
Stack State
Candidate
Auto Join
Yes
Transmission
60 Seconds
Interval
7-16
7.
Ensure that the Commander has the desired Auto Grab setting, then press
the downarrow key:
No (the default) prevents automatic joining of Candidates that
have their Auto Join set to Yes.
Yes enables the Commander to automatically take a Candidate
into the stack as a Member if the Candidate has Auto Join set to
Yes (the default Candidate setting) and does not have a previously
configured password.
8.
Accept or change the transmission interval (default: 60 seconds), then
to return the cursor to the Actions line.
press
[Enter]
9.
Press
(for Save) to save your configuration changes and return to the
[S]
Stacking menu.
Your Commander switch should now be ready to automatically or manually
acquire Member switches from the list of discovered Candidates, depending
on your configuration choices.

Using the Menu To Manage a Candidate Switch

Using the menu interface, you can perform these actions on a Candidate
switch:
Add ("push") the Candidate into an existing stack
Modify the Candidate's stacking configuration (Auto Join and Transmission
)
Interval
Convert the Candidate to a Commander
Disable stacking on the Candidate so that it operates as a standalone
switch
In its default stacking configuration, a Candidate switch can either automati-
cally join a stack or be manually added ("pulled") into a stack by a Commander,
depending on the Commander's Auto Grab setting. The following table lists the
Candidate's configuration options:
Other Settings
Commander, Member, or Disabled
No
Range: 1 to 300 seconds

Advertisement

Table of Contents

   Related Manuals for HP ProCurve Series 2810

This manual is also suitable for:

Procurve 2810-24gProcurve 2810-48g

Comments to this Manuals

Symbols: 0
Latest comments: