Port-based port mirroring
Command: /cfg/pmirr/monport <port number>
[Port 1 Menu]
The following table describes the port-based Port Mirroring Configuration Menu options.
Table 187
Port Mirroring Configuration Menu options
Command
add <mirrored port> in|out|both
rem <mirrored port>
delete
cur
add
- Add "Mirrored" port
rem
- Rem "Mirrored" port
delete
- Delete this "Monitor" port
cur
- Display current Port-based Port Mirroring configuration
Description
Adds the port to be mirrored. This command also allows you to
enter the direction of the traffic. It is necessary to specify the
direction because:
•
If the source port of the frame matches the mirrored port and
the mirrored direction is ingress or both (ingress and egress),
the frame is sent to the mirrored port.
•
If the destination port of the frame matches the mirrored port
and the mirrored direction is egress or both, the frame is sent
to the monitoring port.
Removes the mirrored port.
Deletes this monitored port.
Displays the current settings of the monitoring port.
Configuration Menu 203