Table of Contents
Advertisement
OSPF Host Entry configuration
Command: /cfg/l3/ospf/host <1-128>
[OSPF Host Entry 1 Menu]
The following table describes the OSPF Host Entry Configuration Menu options.
Table 147
OSPF Host Entry Configuration Menu options
Command
addr <IP address>
aindex <0-2>
cost <1-65535>
enable
disable
delete
cur
OSPF Route Redistribution configuration
Command: /cfg/l3/ospf/redist fixed|static|rip
[OSPF Redistribute Fixed
The following table describes the OSPF Route Redistribution Configuration Menu options.
Table 148
OSPF Route Redistribution Configuration Menu options
Command
add <1-32> <1-32>|all
rem <1-32> <1-32> ... |all
addr
- Set host entry IP address
aindex
- Set area index
cost
- Set cost of this host entry
enable
- Enable host entry
disable
- Disable host entry
delete
- Delete host entry
cur
- Display current OSPF host entry configuration
Description
Configures the base IP address for the host entry. For example, 100.10.1.1.
Configures the area index of the host.
Configures the cost value of the host.
Enables OSPF host entry.
Disables OSPF host entry.
Deletes OSPF host entry.
Displays the current OSPF host entries.
add
- Add rmap into route redistribution list
rem
- Remove rmap from route redistribution list
export
- Export all routes of this protocol
cur
- Display current route-maps added
Menu]
Description
Adds selected routing maps to the rmap list. To add all the 32 route
maps, enter all. To add specific route maps, enter routing map
numbers one per line, NULL at the end.
This option adds a route map to the route redistribution list. The
routes of the redistribution protocol matched by the route maps in the
route redistribution list will be redistributed.
Removes the route map from the route redistribution list.
Removes routing maps from the rmap list. To remove all 32 route
maps, enter all. To remove specific route maps, enter routing map
numbers one per line, NULL at the end.
Configuration Menu 173
Advertisement
Table of Contents
