Table 7
System Information Menu options
Command
user
dump
SNMPv3 Information Menu
Command: /info/sys/snmpv3
[SNMPv3 Information Menu]
SNMP version 3 (SNMPv3) is an extensible SNMP Framework that supplements the SNMPv2
Framework by supporting the following:
•
a new SNMP message format
•
security for messages
•
access control
•
remote configuration of SNMP parameters
For more details on the SNMPv3 architecture, see RFC2271 to RFC2276.
The following table describes the SNMPv3 Information Menu options.
Table 8
SNMPv3 Information Menu options
Command
usm
view
access
group
comm
taddr
tparam
notify
dump
Usage
Displays the User Access Information Menu.
Dumps all switch information available from the Information Menu (10K or more,
depending on your configuration).
usm
- Show usmUser table information
view
- Show vacmViewTreeFamily table information
access
- Show vacmAccess table information
group
- Show vacmSecurityToGroup table information
comm
- Show community table information
taddr
- Show targetAddr table information
tparam
- Show targetParams table information
notify
- Show notify table information
dump
- Show all SNMPv3 information
Usage
Displays User Security Model (USM) table information.
Displays information about view name, subtrees, mask and type of view.
Displays View-based Access Control information.
Displays information about the group that includes the security model, user name, and
group name.
Displays information about the community table.
Displays the Target Address table.
Displays the Target parameters table.
Displays the Notify table.
Displays all the SNMPv3 information.
Information Menu 26