Layer 3 Configuration - HP 10GB ETHERNET BL-C SWITCH BMD00022 Command Reference Manual

Layer 3 configuration

Command: /cfg/l3
[Layer 3 Menu]
The following table describes the Layer 3 Configuration Menu options.
Table 129
L3 Configuration Menu options
Command
if <1-250>
gw <1-4, 254>
route
arp
frwd
nwf <1-256>
rmap <1-32>
rip
ospf
igmp
dns
bootp
sm
vrrp
rtrid <IP address (such
as, 192.4.17.101)>
cur
if - Interface Menu
gw - Default Gateway Menu
route - Static Route Menu
arp - ARP Menu
frwd - Forwarding Menu
nwf - Network Filters Menu
rmap - Route Map Menu
rip - Routing Information Protocol Menu
ospf - Open Shortest Path First (OSPF) Menu
igmp - IGMP Menu
dns - Domain Name System Menu
bootp - Bootstrap Protocol Relay Menu
sm - ServerMobility Menu
vrrp - Virtual Router Redundancy Protocol Menu
rtrid - Set router ID
cur - Display current IP configuration
Description
Displays the IP Interface Menu.
Displays the IP Default Gateway Menu.
Displays the IP Static Route Menu.
Displays the ARP (Address Resolution Protocol) Menu.
Displays the IP Forwarding Menu.
Displays the Network Filter Configuration Menu.
Displays the Route Map Menu.
Displays the Routing Interface Protocol Menu.
Displays the OSPF Menu.
Displays the IGMP Menu.
Displays the IP Domain Name System Menu.
Displays the Bootstrap Protocol Menu.
Displays the Server Mobility Menu.
Displays the Virtual Router Redundancy Configuration Menu.
Sets the router ID.
Displays the current IP configuration.
Configuration Menu 158