Table 107
Switch Port ACL Configuration controls
Control
ACL Groups Selected
Port-Based Port Mirroring Configuration
To display the following form, select Port-Based Port Mirroring (click the underlined text, not the
folder).
This form is used to configure, enable, and disable the Monitoring Port. When enabled, network packets
being sent and/or received on a target port are duplicated and sent to a monitor port. By attaching a
network analyzer to the monitor port, you can collect detailed information about your network
performance and usage.
The following table describes the Port-Based Port Mirroring Configuration controls:
Port-Based Port Mirroring Configuration controls
Table 108
Control
Enable Port-Based Port Mirroring?
Monitoring Port
Mirrored Ports
Description
Lists the ACL Groups associated with the port.
Select an ACL Group number in the ACL Groups Available list, and click Add to add the
ACL Group to the port.
Select an ACL Group number in the ACL Groups Selected list, and click Remove to
remove the ACL Group from the port.
Description
Enables or disables port mirroring on the switch. Port mirroring is disabled by
default.
Selects a port number to configure the port as a monitoring port.
Displays the port(s) currently mirrored for each monitoring port.
Configuring the switch
162