Vrrp Virtual Router Group Configuration - HP 10GB ETHERNET BL-C SWITCH BMD00022 Command Reference Manual

The following table describes the Virtual Router Priority Tracking Configuration Menu options.
Table 163
Virtual Router Priority Tracking Configuration Menu options
Command
vrs disable|enable
ifs disable|enable
ports disable|enable
cur

VRRP Virtual Router Group configuration

Command: /cfg/l3/vrrp/group
[VRRP Virtual Router Group Menu]
The Virtual Router Group menu is used for associating all virtual routers into a single logical virtual
router, which forces all virtual routers on the switch to either be master or backup as a group. A
virtual router is defined by its virtual router ID and an IP address. On each VRRP-capable routing
device participating in redundancy for this virtual router, a virtual router will be configured to share
the same virtual router ID and IP address.
Description
When enabled, the priority for this virtual router will be increased for each
virtual router in master mode on this switch. This is useful for making sure that
traffic for any particular client/server pairing are handled by the same switch,
increasing routing and load balancing efficiency. This command is disabled by
default.
When enabled, the priority for this virtual router will be increased for each
other IP interface active on this switch. An IP interface is considered active
when there is at least one active port on the same VLAN. This helps elect the
virtual routers with the most available routes as the master. This command is
disabled by default.
When enabled, the priority for this virtual router will be increased for each
active port on the same VLAN. A port is considered active if it has a link and is
forwarding traffic. This helps elect the virtual routers with the most available
ports as the master. This command is disabled by default.
Displays the current configuration for priority tracking for this virtual router.
track - Priority Tracking Menu
vrid - Set virtual router ID
if - Set interface number
prio - Set renter priority
adver - Set advertisement interval
preem - Enable/disable preemption
ena - Enable virtual router
dis - Disable virtual router
del - Delete virtual router
cur - Display current VRRP virtual router configuration
Configuration Menu 186