Ospf Interface Configuration - HP 10GB ETHERNET BL-C SWITCH BMD00022 Command Reference Manual

OSPF Summary Range configuration
Command: /cfg/l3/ospf/range <1-16>
[OSPF Summary Range 1
The following table describes the OSPF Summary Range Configuration Menu options.
Table 144
OSPF Summary Range Configuration Menu options
Command
addr <IP Address>
mask <IP address mask>
aindex <0-2>
hide disable|enable
enable
disable
delete
cur
OSPF Interface configurat
Command: /cfg/l3/ospf/if <1-249>
[OSPF Interface 1
Menu]
addr - Set IP address
mask - Set IP mask
aindex - Set area index
hide - Enable/disable hide range
enable - Enable range
disable - Disable range
delete - Delete range
cur - Display current OSPF summary range configuration
Description
Configures the base IP address for the range. For example, 100.10.1.1.
Configures the IP address mask for the range.
Configures the area index used by the switch.
Hides the OSPF summary range.
Enables the OSPF summary range.
Disables the OSPF summary range.
Deletes the OSPF summary range.
Displays the current OSPF summary range.
on
i
Menu]
aindex - Set area index
prio - Set interface router priority
cost - Set interface cost
hello - Set hello interval in seconds
dead - Set dead interval in seconds
trans - Set transit delay in seconds
retra - Set retransmit interval in seconds
key - Set authentication key
mdkey - Set MD5 key ID
enable - Enable interface
disable - Disable interface
delete - Delete interface
cur - Display current OSPF interface configuration
Configuration Menu 170