Routing Information Protocol Configuration - HP 10GB ETHERNET BL-C SWITCH BMD00022 Command Reference Manual

Routing Information Protocol configuration

Command: /cfg/l3/rip
[Routing Information Protocol Menu]
The RIP Menu is used for configuring Routing Information Protocol parameters. This option is turned off
by default.
The following table describes the RIP Configuration Menu options.
Table 139
RIP Configuration Menu options
Command
if <1-249>
update <1-120>
redist
on
off
cur
if - RIP Interface Menu
update - Set update period in seconds
redist - RIP Route Redistribute Menu
on - Globally turn RIP ON
off - Globally turn RIP OFF
current - Display current RIP configuration
Description
Displays the RIP Interface menu.
Configures the time interval for sending for RIP table updates, in seconds.
The default value is 30 seconds.
Displays the RIP Route Redistribute menu.
Globally turns RIP on.
Globally turns RIP off.
Displays the current RIP configuration.
Configuration Menu 165