Table of Contents
Advertisement
SNMPv3 Notify Table configuration
Command: /cfg/sys/ssnmp/snmpv3/notify
[SNMPv3 snmpNotifyTable 1
SNMPv3 uses Notification Originator to send out traps. A notification typically monitors a system for
particular events or conditions, and generates Notification-Class messages based on these events or
conditions.
The following table describes the SNMPv3 Notify Table Configuration menu options.
Table 94
SNMPv3 Notify Table Configuration Menu options
Command
name <1-32 characters>
tag <1-255 characters>
del
cur
System Access configuration
Command: /cfg/sys/access
[System Access Menu]
The following table describes the System Access Configuration menu options.
Table 95
System Access Configuration Menu options
Command
mgmt
user
http disable|enable
https
name
- Set notify name
tag
- Set notify tag
del
- Delete notifyTable entry
cur
- Display current notifyTable configuration
Description
Defines a locally arbitrary but unique identifier associated with this SNMP
notify entry.
Defines a tag of 255 characters maximum that contains a tag value which is
used to select entries in the Target Address Table. Any entry in the
snmpTargetAddrTable, that matches the value of this tag, is selected.
Deletes the notify table entry.
Displays the current notify table configuration.
mgmt
- Management Network Definition Menu
user
- User Access Control Menu (passwords)
http
- Enable/disable HTTP (Web) access
https
- HTTPS Web Access Menu
wport
- Set HTTP (Web) server port number
snmp
- Set SNMP access control
tsbbi
- Enable/disable telnet/ssh configuration from BBI
tnet
- Enable/disable Telnet access
tnport
- Set Telnet server port number
tport
- Set the TFTP Port for the system
cur
- Display current system access configuration
Description
Displays the Management Configuration Menu.
Displays the User Access Control Menu.
Enables or disables HTTP (Web) access to the Browser-based Interface. It is
enabled by default.
Displays the HTTPS Menu.
Menu]
Configuration Menu 127
Advertisement
Table of Contents
