Operations Menu; Introduction; Menu Information; Operations-Level Port Options - HP 10GB ETHERNET BL-C SWITCH BMD00022 Command Reference Manual

Operations Menu

Introduction

Operations-level commands are used for making immediate and temporary changes to switch
configuration. The Operations Menu is used for bringing ports temporarily in and out of service. This
menu is available only from an administrator and operator login.

Menu information

Command: /oper
[Operations Menu]
The following table describes the Operations Menu options.
Table 192
Operations Menu options
Command
port <port number>
vrrp
passwd <1-128 characters>
clrlog
ntpreq

Operations-level port options

Command: /oper/port <port number>
[Operations Port 1 Menu]
port - Operational Port Menu
vrrp - Operational Virtual Router Redundancy Menu
passwd - Change current user password
clrlog - Clear syslog messages
ntpreq - Send NTP request
Description
Displays the Operational Port Menu.
Displays the Operational Virtual Router Redundancy Menu.
Allows the user to change the password. You need to enter the current
password in use for validation.
Clears all Syslog messages.
Allows the user to send requests to the NTP server.
8021x - 802.1x Menu
rmon - Enable/Disable RMON for port
ena - Enable port
dis - Disable port
cur - Current port state
Operations Menu 208