Ethernet Statistics - HP 10GB ETHERNET BL-C SWITCH BMD00022 Command Reference Manual

Hewlett-packard switch user manual
Table of Contents

Advertisement

Ethernet statistics

Command: /stats/port <port number>/ether
Ethernet statistics for port 1:
dot3StatsAlignmentErrors:
dot3StatsFCSErrors:
dot3StatsSingleCollisionFrames:
dot3StatsMultipleCollisionFrames:
dot3StatsLateCollisions:
dot3StatsExcessiveCollisions:
dot3StatsInternalMacTransmitErrors:
dot3StatsFrameTooLongs:
dot3StatsInternalMacReceiveErrors:
The following table describes the Ethernet statistics for a selected port:
Table 48
Ethernet statistics for port
Statistics
dot3StatsAlignmentErrors
dot3StatsFCSErrors
dot3StatsSingleCollisionFrames
0
0
0
0
0
0
NA
0
0
Description
A count of frames received on a particular interface that are
not an integral number of octets in length and do not pass the
Frame Check Sequence (FCS) check.
The count represented by an instance of this object is
incremented when the AlignmentError status is returned
by the MAC service to the Logical Link Control (LLC) (or other
MAC user).
Received frames for which multiple error conditions obtained
are, according to the conventions of IEEE 802.3 Layer
Management, counted exclusively according to the error
status presented to the LLC.
A count of frames received on a particular interface that are
an integral number of octets in length but do not pass the
Frame Check Sequence (FCS) check.
The count represented by an instance of this object is
incremented when the frameCheckError status is returned by
the MAC service to the LLC (or other MAC user).
Received frames for which multiple error conditions obtained
are, according to the conventions of IEEE 802.3 Layer
Management, counted exclusively according to the error
status presented to the LLC.
A count of successfully transmitted frames on a particular
interface for which transmission is inhibited by exactly one
collision.
A frame that is counted by an instance of this object is also
counted by the corresponding instance of the
ifOutUcastPkts, ifOutMulticastPkts, or
ifOutBroadcastPkts, and is not counted by the
corresponding instance of the
dot3StatsMultipleCollisionFrame object.
Statistics Menu 77

Advertisement

Table of Contents
loading

This manual is also suitable for:

10gb ethernet bl-c

Table of Contents