Table of Contents
Advertisement
Table 185
RMON Alarm Menu options
Command
revtidx <0-65535>
fevtidx <0-65535>
owner <1-127 characters>
delete
cur
Port mirroring
Command: /cfg/pmirr
[Port Mirroring Menu]
The Port Mirroring Configuration Menu is used to configure, enable, and disable the monitored port.
When enabled, network packets being sent and/or received on a target port are duplicated and sent
to a monitor port. By attaching a network analyzer to the monitor port, you can collect detailed
information about your network performance and usage. Port mirroring is disabled by default.
NOTE:
See the "Troubleshooting tools" appendix in the HP 10Gb Ethernet BL-c Switch Application
Guide for information on how to use port mirroring.
The following table describes the Port Mirroring Configuration Menu options.
Table 186
Port Mirroring Configuration Menu options
Command
mirror disable|enable
monport <port number>
cur
mirror
- Enable/Disable Mirroring
monport - Monitoring Port based PM Menu
cur
- Display All Mirrored and Monitoring Ports
Description
Enables or disables port mirroring
Displays port mirroring menu.
Displays current settings of the mirrored and monitoring ports.
Description
Configures the rising alarm event index that is triggered
when a rising threshold is crossed.
The range is from 0 to 65535. The default value is 0.
Configures the falling alarm event index that is triggered
when a falling threshold is crossed.
The range is from 0 to 65535. The default value is 0.
Enter a text string that identifies the person or entity that uses
this alarm index.
The owner can have a maximum of 127 characters.
Deletes this alarm index.
Displays the current RMON Alarm parameters.
Configuration Menu 202
Advertisement
Table of Contents
