Table of Contents
Advertisement
Table 189
Failure Detection Pair Configuration Menu options
Command
current
Link to Monitor configuration
Command: /cfg/ufd/fdp/ltm
[Failure Link to Monitor Menu]
The following table describes the Link to Monitor (LtM) Menu options. The LtM can consist of only one
uplink port (ports 18-21) or a single trunk containing only uplink ports.
Table 190
Link to Monitor Menu options
Command
addport <port number>
remport <port number>
addtrnk <1-12>
remtrnk <1-12>
addkey <1-65535>
remkey <1-65535>
cur
Description
Displays the current FDP configuration.
addport - Add port to Link to Monitor
remport - Remove port from Link to Monitor
addtrnk - Add trunk to Link to Monitor
remtrnk - Remove trunk from Link to Monitor
addkey
- Add adminkey to Link to Monitor
remkey
- Remove adminkey from Link to Monitor
cur
- Display current LtM configuration
Description
Adds a port to the LtM. Only uplink ports (18-21) are allowed in the
LtM.
Removes a port from the LtM.
Adds a trunk group to the LtM. The LtM trunk group can contain only
uplink ports (18-21).
Removes a trunk group from the LtM.
Adds a LACP admin key to the LtM. LACP trunks formed with this
admin key will be included in the LtM.
Removes a LACP admin key from the LtM.
Displays the current LtM configuration.
Configuration Menu 205
Advertisement
Table of Contents
