First Printing Position (Formadj); Printhead Gap Manually (Head) - Dascom Tally T2380 User Manual

User guide

First printing position (FormAdj)

Forml FormAdj
Back Next
1 2 3 4
FormAdj= 12/72 * "
Set < > Exit
1 2 3 4

Printhead gap manually (Head)

Head
Back Next
1 2 3 4
Head= 18 *
Set < > Exit
1 2 3 4
Sets the first print position of a form in n/72 inch, separately adjust-
able for each paper path.
The settings made here reduce the height of the printable area.
Press FormAdj (3) key.
Online
Setup
Use the < (2) or > (3) key to select the desired setting.
Setting Options: 0/72" to 220/72"
Online
Default Setting: 12/72"
Setup
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
An alternative notation for FormAdj is TOF (Top Of Form).
This parameter is ignored if the automatic gap adjustment (AGA) is
activated; see
Adjusts the printhead gap manually; separately adjustable for each
paper path.
Press Head (2) key.
Online
Setup
Use the < (2) or > (3) key to select the desired setting.
Online Setting Options: 0 to 100
Default Setting: 18
Setup
Select the Head = 18 parameter for normal paper. Use a greater dis-
tance for thicker paper.
Recommended values for the print head gap:
thin
18
If you change this value, this may affect the print quality.
If the printout shows signs of smudging, we recommend that
you increase the print head gap.
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
Automatic gap adjustment (AGA) (page
26 34 42
The Menu
103).
thick
50 58
83