Operator Maintenance; Ordering Xf All-In-One Consumables And Maintenance Kits; Perpetual Counters; Figure 1.1: Counters Menu - Bell and Howell Spectrum XF Maintenance Manual

This section covers the maintenance of your scanner: how to order parts kits specific to
Spectrum XF; information the scanner provides for assisting in its maintenance; and
required, general maintenance procedures.
1.1 Ordering XF All-In-One Consumables and
Note
Spectrum XF scanners have All-in-One Consumable and Universal
Maintenance Kits that are specific to the XF model series. Other Böwe Bell +
Howell All-in-One Consumable and Universal Maintenance Kits will not
contain some of the necessary items required for maintaining your XF
scanner.
Spectrum XF All-in-One Consumable and Universal Maintenance Kits are available
through Böwe Bell + Howell Authorized Service Providers (ASPs), Authorized Spare
Parts Resellers (ASPRs), and from www.bbhscanners.com. A complete listing of all
Böwe Bell + Howell ASPs, and ASPRs can also be found there.
The scanner has perpetual page and hour counters for monitoring quantity and hours of
operation. These counters are used by the scanner for monitoring when lamps should
be replaced, as well as assists the operator in the over-all maintenance of the scanner.
To review the perpetual counters, take the following steps:
1. From the Home menu, press the RIGHT ARROW key until you reach the Counters
menu.
2. Press the F3 key [NEXT] to view total pages scanned.
S006504 Rev D

1 Operator Maintenance

Counters
NEXT

Figure 1.1: Counters Menu

1 Operator Maintenance
Maintenance Kits
1.2

Perpetual Counters

1 of 27