Symbols You Should Know - Bell and Howell Spectrum XF Maintenance Manual

Spectrum XF Maintenance Manual
You will see three types of symbols in this manual: a Warning symbol; a Caution symbol;
and a Note symbol.
Each time a symbol appears in the manual, it is followed by important information that
you should read and follow carefully. Below are examples of each of the three symbols:
Warning
This symbol identifies a hazard or procedure that could cause bodily injury or
loss of life if performed incorrectly. When you see this symbol, be sure to read
all the information in the section before you continue.
Caution
This symbol identifies a hazard or procedure that could damage or destroy
equipment if performed incorrectly. When you see this symbol, be sure to
read all the information in the section before you continue.
Note
This symbol identifies important information that requires special attention.
When you see this symbol, be sure to read all the information in the section
before you continue.
viii

Symbols You Should Know

S006504 Rev D