Figure 1.24: Page Entry Transmitter Sensors; Figure 1.25: Page Exit Transmitter Sensors; Figure 1.26: Page Entry Receiver Sensors - Bell and Howell Spectrum XF Maintenance Manual

Spectrum XF Maintenance Manual
Note
Do not turn the sensor and transport cleaner can upside down or tip it
sideways more than 40 degrees while using. In some instances, you will need
to bend the red extension tube that comes with the transport cleaner can to
avoid tipping the can itself.
5. Clean the entry sensors of the scanner using the sensor and transport cleaner. Note
the location of the sensors as illustrated in Figures 1.24, 1.25,
16 of 27

Figure 1.24: Page Entry Transmitter Sensors

Figure 1.25: Page Exit Transmitter Sensors

Figure 1.26: Page Entry Receiver Sensors

1.26 and 1.27.
S006504 Rev D