Spectrum XF Maintenance Manual
3. Press the F3 key [NEXT] to view the total hours the scanner has been on.
4. Press the F3 key [NEXT] to view total pages fed.
5. Press the F3 key [NEXT] to view front lamp hours used.
6. Press the F3 key [NEXT] to view back lamp hours used.
7. Press the CLEAR key to return to the Home menu.
The Code Revision Numbers menu displays the hardware and software revision
numbers for various parts of the system.
To review the code revision numbers, follow the procedure below:
1. From the Home menu, press the RIGHT ARROW key until you reach the Code
Revision Numbers menu.
2. Press the F3 key [NEXT] to scroll through the list of devices that report a software
revision number. The number and type of revision numbers displayed will depend on
the particular set of options fitted to the scanner.
2 of 27
Scanned:
NEXT
Figure 1.2: Total Pages Scanned Counter
Hours On:
NEXT
Figure 1.3: Total Hours On Counter
Pages Fed:
NEXT
Figure 1.4: Total Pages Fed Counter
Front lamp hours:
NEXT
Figure 1.5: Front Lamp Hours Counter
Back lamp hours:
NEXT
Figure 1.6: Back Lamp Hours Counter
1.3
Code Revision Numbers
NEXT
Figure 1.7: Code Revision Numbers Menu
Code Revision Numbers
S006504 Rev D