Release Notes - Bell and Howell Spectrum XF Maintenance Manual

Item
Corrected European
office information
Explanation of timer
or counter function
found in the
Calibration in
Progress menu
corrected
New step added to
the procedure for
cleaning the skimmer
rollers
Change in descriptive
verbiage involving
certain cleaning
procedures
S006504 Rev D
Status Location in Manual
Revised Contact Information
Calibration in Progress
Revised
menu
1.4.5 Cleaning the
New
Skimmer Rollers
Section 1.4.1 Cleaning
the Glass Flat
Cleaning Both Sides of
the Glass Flat
Revised
Section 1.4.1.2
Replacing the Glass
Flat
Section 1.4.13 Cleaning
the Separator Roller

Release Notes

Release Notes
Detail
Address and contact
information revised.
Was: The Calibration in
Progress menu contains a
counter that displays the
amount of time left in the
calibration process.
Now: The Calibration in
Progress menu contains a
counter that displays the
amount of time the calibration
is taking to complete.
Added: Caution message
after step 11, and the addition
the additional instruction/step
to clean the separator roller
after cleaning the skimmer
rollers
The Optic Cleaning Pad is no
longer a part of the Spectrum
XF All-In-One and Spectrum
XF Cleaning kits. It has been
replaced with a Glass & Roller
Cleaner and a Glass Cleaning
Cloth.
The areas in the manual
noted here have been revised
to reflect this.
WAS: ...the Optic Cleaning
Pad...
NOW: ...the Roller & Glass
cleaner with the Glass
Cleaning Cloth...
iii