Thank You; About The Infinity Wf Operator Manual; Registering Your New Scanner - Bell and Howell Infinity WF WF 36 Operator's Manual

Thank You

Thank You
Thank you for purchasing a BÖWE BELL + HOWELL (BBH) scanner.
Your scanner comes with everything you need to connect and operate a wide format scanning
solution. There is no need to purchase additional cables or even software. This device
operates over an Ethernet connection and requires some basic networking knowledge to setup
and scan to a single PC or network.

About the Infinity WF Operator Manual

This manual describes the purpose and function of the Infinity WF scanners (WF 36, WF 42,
and WF 48); specifically the setup, installation and normal operation of the scanner. It is written
for the scanner operator, administrator, and the Information Technology staff. It also refers to
individual access levels at which configuration and adjustment processes are performed,
specifically the "User" and "Poweruser". A third level permission, the "Admin", is for BBH
Authorized Service Providers only and is not covered in this manual.
This manual is formatted for 2-sided printing.

Registering Your New Scanner

Please register your new scanner. Registering serves as a verification of ownership and
confirms your right to protection under the terms and conditions of your warranty. Registration
also helps us serve you better if issues arise that require communication with BBH.
Please visit the warranty registration page on our website (you may also copy and paste this link
in your browser: http://www.bbhscanners.com/support/warranty/index.html, or complete and
return to BBH the warranty registration card that shipped with your new scanner.
If you have any additional questions regarding warranty or support please contact us.
S008459 Rev C xiii