Stacking - Christie M Series User Manual

Section 2: Installation and Setup

2.4.3 Stacking

The M Series projectors can be stacked up to a maximum of 3 projectors high using the Christie stacking frame
(118-100107-XX).
1. Turn the projector OFF and disconnect the AC power cord after the cooling fans have stopped.
2. Make sure the base plate is flat.
3. Place the projector into the stacking frame.
NOTE: There are two ways of placing the projector into the stacking frame: from the top or from the front.
4. Make sure the pitch is to its maximum, prior to placing the projector from the front.
5. Make sure the bottom base plate of the frame is aligned with the projector.
6. Use a 6 mm Allen key to tighten the (6) M8 bolts securing the base plate to the bottom of the projector.
7. M8 safety point must be used when flying projectors overhead.
2-14 M Series User Manual
020-100009-08 Rev. 1 (05-2013)