Shutter; Status Led; Electronics/Sw - Christie M Series User Manual

7.2.12Status LED

STATUS LED'S
Lamp 1, Lamp 2
Power

Shutter

7.2.13Electronics/SW

FEATURE
Video Format Re-Sizing
Picture in Picture
Seamless Switching
Built-in 2D keystone and geometry correction
Auto-scaling
Auto-de interlacing
Edge blending
Warping
Tiling (support for up to 3x3 arrays)
Blanking and Image positioning
Brightness, contrast, color, and uniformity user configurable control
Image orientation
Electronics HW access
Number of option cards
Number of processor cards
Number of option slots
Native format adjustment
Arbitrary Gamma
M Series User Manual
020-100009-08 Rev. 1 (05-2013)
LED STATES
Off
– Lamps are off
Yellow
– Lamp time has expired and lamp should be replaced
Green
– Lamp is on and operating correctly
Flashing red
– Lamp has malfunctioned
Off
– AC power is off
Yellow
– AC is present but projector is in standby
Green
– Projector is powered up and operating normally
Flashing Green/Yellow
Flashing Red
– Error has occurred. Details are displayed on the status display
Green
– shutter is open
Yellow
– shutter is closed
COMMENTS
All video formats can be resized to fill screen either horizontally or
vertically while maintaining aspect ratio
Black level edge blending not available on WX models
Can display image front/rear, normal/inverted (ceiling)
All accessible electronics are mounted from the back of the projector
6 user inter-changeable – hot swappable
2 user inter-changeable
4, located at back of projector for option cards; 1, located at back of
projector for processor card
Optional global aspect ratio setting can be set for projector allowing
for automatic scaling of all input images to required output format
User definable gamma curves
– Projector communication in progress
Section 7: Specifications
7-7