Christie M Series User Manual page 156

Appendix C: DMX / ArtNet
CHANNEL GROUP
14 Input
15 Image
16 Lamps/
Power
17 Image
18 Image
19 Setup
Functions
20 Setup
Functions
21 Setup
Functions
22 Setup
Functions
B-4
NAME DESCRIPTION
Input Input Selection
0 to 9 Slot 1, Input 1
10 to 19 Slot 1, Input 2
—
50 to 59 Slot 1, Input 6
60 to 69 Slot 2, Input 1
—
110 to 119 Slot 2, Input 6
120 to 129 Slot 3, Input 1
—
170 to 179 Slot 3, Input 6
180 to 189 Slot 4, Input 1
—
230 to 239 Slot 4, Input 6
Image Freeze 0-85 Unfreeze image
172-255 Freeze Image
Power 0-85 Power Off (Switch lamps off,
cool lamps down and go to Standby
mode)
172-255 Power On (Switch lamps
on, warm up mode)
Size 0 to 255 Scaled as % of total control
range, which is 200 to 4000
Vertical Stretch 0 to 255 Scaled as % of total control
range, which is 200 to 3000
Projector 0-49 Front Projection
50-99 Rear Projection
Orientation
100-149 Front Projection Inverted
150-199 Rear Projection Inverted
On Screen 0-85 OSD Off
172-255 OSD On
Display
Lens Calibrate 172-255 Run calibration
Lamp Power Scaled as % of total control range.
Examples are given for 350W and
200W lamps:
0 0% 300 Watt / 150 Watt
—
127 50% 335 Watt / 175 Watt
—
255 100% 370 Watt / 200 Watt
DEFAULT NOTES
VALUE
255 Will not change input on
default
0
128 A 5 second timer will be
used before executing a
power state change. If the
slider moves out of the
On/Off range within the
5 seconds, the timer will
be cancelled.
Will not change power
stat on default.
67
91
255 Will not change projector
orientation on default.
128 Will not change OSD on
default.
0 Locked by channel
"Lens shift enable".
255 Depends on what lamps
are used, power rating
may be different scale.
M Series User Manual
020-100009-08 Rev. 1 (05-2013)