Purchase Record And Service Contacts; Projector Overview; How The Projector Works - Christie M Series User Manual

Section 1: Introduction
1.2

Purchase Record and Service Contacts

Whether the projector is under warranty or the warranty has expired, Christie's highly trained and extensive
factory and dealer service network is always available to quickly diagnose and correct projector malfunctions.
Complete service manuals and updates are available for all projectors. Should a problem be encountered with
any part of the projector, contact your dealer. In most cases, servicing is performed on site. If you have
purchased the projector, fill out the information below and keep with your records.
Dealer:
Dealer or Christie Sales/Service Contact Phone Number:
Projector Serial Number*:
Purchase Date:
Installation Date:
* The serial number can be found on the license label located on the back of the projector.
Table 1.1 Ethernet Settings
Default Gateway:
DNS Server:
Projector DLP Address:
Projector Mgmt IP Address:
Subnet Mask:
1.3

Projector Overview

The M Series is a family of high resolution video/graphics 3 chip 1080p
HD, SXGA+, WUXGA and WXGA projectors, see Table 1.2 M Series
Projectors for specific models. These projectors are based on next
generation DLP™ technology provided by Texas Instruments.

1.3.1 How the Projector Works

The projector accepts data/graphics and video input signals for projection onto front or rear screens. Light is
generated by dual mercury lamps, then modulated by three Digital Micro-mirror Device (DMD) panels that
provide digitized red, green or blue color information. Light from the "ON" pixels of each panel is reflected,
converged and then projected to the screen through a single front lens, where all pixels are perfectly
superimposed as a sharp full-color image.
1-2 M Series User Manual
020-100009-08 Rev. 1 (05-2013)