Christie M Series User Manual page 117

The following table describes each area found in the Admin window.
A
Restore section allows you to
select the file and file type that
you wish to restore.
D
Logo Position and Background
Color section is enabled when
you select a Logo file type from
the Upload section.
G
Upload, Backup, Restore, and
Interrogator buttons perform
their respective functions, after
the setting for the function have
first been selected from the drop-
down lists, and other fields on
the left.
Upload a Logo File or Gamma File
IMPORTANT: The projector must be powered on to enable the Upload drop-down list.
1. Click the Upload Browse button to open the Choose file window.
2. Locate and select the file you wish to upload from a Network drive location or from your hard drive.
3. Select the file type (Logo or Gamma) from the Upload drop-down list.
NOTE: If you select a Logo file type, it must be a 24-bit, bitmap file. This enables the Logo Position and
Background Color section. Proceed to Step 3a.
If you select a Gamma file type, it must be a .csv file with 1024 values (all colors same) or 1024 x 3 for
individual colors. This enables the Gamma Properties section. Proceed to Step 4a.
a. Enter the Logo position for the X and Y fields.
b. Click the Color square to open the Choose Background Color window, choose the desired
background color from the color palette, and click OK. The color square changes to the selected color.
c. Click the Upload button to display the Logo Upload window. Click Yes or No to confirm or cancel
the upload.
An Upload in Progress window appears.
4. Click the Upload button to display the Logo Upload window.
a. Enter a descriptive name in the Display Name field.
b. Click the Upload button to display the Gamma Upload window. Click Yes or No to confirm or cancel
the upload respectively.
An Upload in Progress window appears.
M Series User Manual
020-100009-08 Rev. 1 (05-2013)
B
Backup section allows you to
select the file and file type that
you wish to backup.
E
Gamma Properties section is
enabled when you select a
Gamma file type from the
Upload section.
H
Upgrade button, reboots unit into
fail-safe mode for upgrading. see
M Series Software
the
Upgrade Instruction Sheet P/
N 020-100267-xx
.
Section 4: Web User Interface
C
Upload section allows you to
select the file and file type that
you wish to upload.
F
Sync button is used to set the
projector date and time to match
that on your computer.
I
Hide button allows you to
disable the display of the help
text.
4-7