Main Tabbed Page - Lens; Tools Tabbed Page - Virtual Osd; M Series User Manual - Christie M Series User Manual

Section 4: Web User Interface

4.2.5 Main Tabbed Page - Lens

Under the Main tabbed page, select the Lens secondary tab to define your adjustment settings for the lens.
For detailed information, see

4.2.6 Tools Tabbed Page - Virtual OSD

Under the Tools tabbed page, select the Virtual OSD secondary tab to access to the virtual OSD page.
The following table describes each area found in the Tools window.
A
Virtual OSD tabbed page
presents the Main Menu (see
Appendix A: Menu Tree
details).
D
OSD section contains an On and
Off button. Only one is enabled
depending on the current state of
the OSD. Control of the OSD is
always available through the
remote.
4-4
Section 3 Operation.
B
Maximize/Minimize button
toggles depending on the current
for more state of the projector. When
maximized, the Virtual OSD
displays over the entire page so
that subsequent menus can be
viewed without scrolling. No
access to tabbed pages when
maximized.
E
Auto Setup button uses the
manufacture's default settings
(see
Section 3 Operation
details).
C
Help button presents a pop-up
window which provides
information to help you navigate
within the current menu.
for more

M Series User Manual

020-100009-08 Rev. 1 (05-2013)