Geometry And Color - Submenu; Geometry Correction - Submenu - Christie M Series User Manual

Section 3: Operation
Table 3.3 Available Trap Events
EVENT
Projector powered on
(Standby to Lamps On)
Projector powered off
(Lamps On to Standby)
No video input signal
Video input signal detected
Lamp door open
Lamp door closed
Email Notification
When a trap occurs while Email Notification is selected for the event, an individual email will be sent to each
user defined email recipient. The SNMP menu allows up to 3 email address (up to 64 characters in length) to
request notifications from the system during a trap event.
The resulting email will be in the following format:
From: <from@email.com>
To: <to@email.com>
Subject: Christie M Series Projector SNMP Notification
Message:
Projector Name: <projector name>
Location: <SNMP location>
IP Address: <IP address>
Description: <message from Table 3.3>
Parameters: <param 1 from Table 3.3> = <param 1 value>; <param 2 from
Table 3.3> = <param 2 value>; ...

3.7.12Geometry And Color - Submenu

In the Configuration menu, select the Geometry and Color submenu when you need to modify overall color
performance and/or image geometry for all sources.
• Test Pattern: Choose the desired internal test pattern, or select OFF to turn off a test pattern. Alternatively,
use the T
EST
key for cycling through test patterns.

3.7.13Geometry Correction - Submenu

Keystone is typically caused by tilting the projector in relation to the screen, so that the lens surface and screen
are no longer parallel to each other. Vertical keystone is used to correct a keystoned image shape in which the
3-40
MESSAGE
(EMAIL NOTIFICATION)
Projector turned on (lamps on)
Projector turned off (lamps
off)
No video input signal
Video input signal detected
Lamp door has been opened
Lamp door has been closed
TRAP CONFIG.
PARAMETERS
None Power
Frequency Signal Lost/Detected
Lamp Number Lamp Door
DEFAULT
NOTIFICATION
MENU TEXT
SETTING
Disabled
M Series User Manual
020-100009-08 Rev. 1 (05-2013)