User Interface Overview; List Of Components; Key Features - Christie M Series User Manual

1.3.2 User Interface Overview

The projector can be controlled via a menu system displayed on the image. The menu system can be controlled
by an IR remote, wired remote or through the built-in keypad. The LCD screen and built-in keypad allow
some functions to be controlled without the need of an OSD display, and provide a quickly accessible interface
to view error reporting. The functions on the OSD can also be controlled using the Christie Serial Protocol, via
a serial or Ethernet connection to the projector. The Web interface provides access to the menu system as a
Virtual OSD (On-screen display) and to features that maintain the software and settings.

1.3.3 List of Components

Ensure the following components were received with the projector:

IR remote keypad (includes two, 1.5V AA batteries and an XLR to mini-stereo cable conversion to wired)

Line cord

Lens Mount Security Screw (M6x10mm long, Qty. 2)

Lens Mount Security Screw (5mm Hex, Qty. 1)

Warranty Card

Web Registration Form

1.3.4 Key Features

• Up to 14,000 lumens
• HD (1080p) or SXGA+, WUXGA, or WXGA resolution
• Dual Mercury lamp illumination with 200W, 350W and 450W options
• Dynamic Iris contrast aperture providing up to 10,000:1 contrast ratio (available on 200W and 350W models)
• Ultra-compact design and weighs less than 55lbs
• 10-bit image processor electronics with modular design
• Fully sealed optical system
• Active fan control for minimum noise level
• Selectable, motorized Yellow Notch Filter for expanded color gamut
• User interchangeable projection lenses with no-tool mounting
• Picture-in-picture (PIP)
• LiteLOC for constant brightness maintenance
• Intelligent Lens System (ILS)
• Motorized lens mount for all models
• Auto-setup feature
• Integrated ChristieNET
• Networking ability through RS-232 and RS-422 connectors
• Status LED display on built-in keypad for easy projector status monitoring
• Control with remote keypad, wired remote, or built-in keypad
• Four input slots for Optional Input Modules
See Section 7 Specifications
M Series User Manual
020-100009-08 Rev. 1 (05-2013)
for a complete list of technical specifications.
Section 1: Introduction
1-3