Infrared Ports, Read - Barco Projector User Manual

Description :
Read the status of the infrared ports.
Command :
Command[0]
Data :
No data bytes.
Return data :
Data[0] = status.
bit#
bit0 (lsb)
bit1
bit2
* : when no hardwired remote is connected,
bit 0 and bit 1 indicate the previous state of
the corresponding receivers. (in reality, they
are enabled)

infrared ports, read

\x6f
bit = 0 bit = 1
receiver front receiver front
disabled enabled
receiver rear receiver rear
disabled enabled
no hardwired hardwired
remote* remote
229