Setting Up - Netware; Section 6 Setting Up - Netware - Axis 5470e User Manual

96
Section 6: Setting Up - NetWare
Section 6

Setting Up - NetWare

This section describes how to continue the installation of the AXIS
5470e in the NetWare environment. Identify which transport
protocol you are running on your network and which installation
method you should use. Continue the installation by selecting the
appropriate installing instructions from the table below:
Installation Transport
method protocol
NDPS TCP/IP
IPX/SPX
Printer
Transport
Configuratio
protocol
n method
PSERVER IP/IPX
mode
Remote IPX/SPX
Printer mode
If you intend to operate your AXIS 5470e in a multi-protocol, mixed
environment, you should also proceed to the other relevant sections
in this manual, namely:
Section 7 Setting Up - Windows, on page 104
Section 9 Setting Up - Macintosh, on page 122
Section 10 Setting Up - UNIX, on page 128
Section 12 IPP (Internet Printing Protocol), on page 158
Action
See Setup using NDPS, on page 97
Proceed with Installing the AXIS 5470e in an NDPS environments,
on page 97.
Action
See Setup using Queue-based printing over IP/IPX in PSERVER
Mode, on page 99 and then
Queue-based Printing Methods, on page 102
See Setup for Queue-based printing over IPX/SPX (Remote Printer
Mode), on page 101 and then
Queue-based Printing Methods, on page 102
AXIS 5470e User's Manual