Axis 5470e User Manual page 26

Section 3: Basic Installation
26
Note:
If your print server does not appear in the serial number list, refer to the AXIS IP
JumpStarter online help files.
Setting the IP address using arp/ping
Refer to the appropriate section below to assign an IP address to
your AXIS 5470e using arp/ping:
Windows
Open a Command Prompt and enter the following syntax:
Syntax
1.
arp -s <Internet address> <Ethernet address>
2.
ping <Internet address>
3.
arp -d <Internet address>
The host will return reply from 192.168.3.191, or a
similar message. This indicates that the address has been set and
that communication is established. You are now ready to print
using FTP or Reverse Telnet.
UNIX, Mac OS X
Open a Terminal and enter the following syntax:
Syntax
1.
arp -s <host name> <Ethernet address> temp
2.
ping <host name>
The host will return psname is alive, or a similar message.
This indicates that the address has been set and that
communication is established. You are now ready to print using
FTP or Reverse Telnet.
AXIS 5470e User's Manual
Example
arp -s 192.168.3.191 00-40-8c-18-16-36
ping 192.168.3.191
arp -d 192.168.3.191
Example
arp -s psname 00:40:8c:18:16:36 temp
ping psname