Axis 5470e User Manual page 150

150
Section 11: Management and Configuration
the Status file
Performing resets
Printing Hexdumps
Viewing The status command shows which printer port the logical printers are
assigned to, and their current status.
Follow the instructions below to view the status file using telnet:
1. Log in to the AXIS 5470e by typing:
telnet <host name>
window (Windows and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
and
pass
3. View the status file by typing:
status
Three types of reset commands allow you to perform soft resets, to
perform hard resets, and to reset the print server's parameters to its
default settings.
Follow the instructions below to perform a soft reset using telnet:
1. Log in to the AXIS 5470e by typing:
telnet <host name>
window (Windows and OS/2) or in a UNIX shell.
2. Enter the user id and the password. (The default entries are
and
pass
3. Restart the print server's protocols by typing:
softreset
Replace the command in step 3 above with
to perform the other two reset operations.
The AXIS 5470e allows you to record a trace of the communication
between the AXIS 5470e and the host.
The AXIS 5470e supports hexdump printing for the SNA, TN3270E,
TN5250E, LPR/LPD and Raw TCP/IP printing protocols. Please refer to
Product Model Summary, on page 7 for details on the supported
protocols.
or
telnet <IP address>
.)
or
telnet <IP address>
.)
AXIS 5470e User's Manual
in a DOS
in a DOS
or
hardreset default
root
root