Section 3 Setting Up - Netware; Set Up Using The Axis Netpilot - Axis 540 series User Manual

Section 3 Setting Up - NetWare

Set Up using the AXIS NetPilot

Notes:
Caution
AXIS 540/640 User's Manual
If you have not already done so, you should use the Installation
Wizard in AXIS NetPilot to install your network print server; refer to
Section 2 - Basic Installation.
After performing the basic installation, the AXIS 540/640 is ready for
printing within the NetWare environment. This section provides
information for making further adjustments to the configuration.
If you intend to operate your AXIS 540/640 in a multiprotocol
environment, you should also proceed to the other relevant sections in
this manual, namely:
Section 4 Setting Up - Windows
Section 5 Setting Up - OS/2
Section 6 Setting Up - Macintosh
Section 7 Setting Up - UNIX
Section 8 Web Based Management
You may use the AXIS NetPilot to:
• set up the print queues, printers, and print servers.
• set up the configuration parameters of the AXIS 540/640.
• monitor the printers on the network.
AXIS NetPilot contains an extensive on-line help facility to assist
you with any of the operations listed above.
The AXIS NetPilot software is designed to set up a range of
different network environments. Therefore you will encounter
windows that are relevant to other systems as well as NetWare.
M
Any network configuration should involve the Network
Administrator.
Section 3: Setting Up - NetWare
NetWare
35